Monthly Archives: June 2015

2015 04 20 22 05 11

Deploy a Cisco UCS system – Part 1 – from scratch for VMware ESXi

Cisco, VMware, , , , , , , , , ,

First off, huge thanks to the following posts by Rene Van Den Bedem and his Cisco UCS installation guide.

My aim here is not to rip off his posts, but to detail the process myself and use my own screenshots, as along the way, the setup was slightly different to Rene’s, such as the configuration needed for the SD Cards, and the lack of boot from SAN configuration.

Covered in Part 1;

  • The hardware/software
  • Cabling diagram
  • Pre-Reqs
  • Understanding Cisco’s policy based management
  • Summary of Task List
  • Setting up Fabric Interconnects
  • Connecting to Cisco UCS Manager

The Hardware/Software Continue reading Deploy a Cisco UCS system – Part 1 – from scratch for VMware ESXi →

vmware vcp dcv

VCP5-DCV Exam Experience

General, VMware, , ,

I passed the VCP5-DCV exam at the start of the week.

Why take it now?

Having worked with VMware for many years, I’ve never actually taken a VCP exam, this was due to not realising many years ago you could sit an exam and the course was not mandatory. When I finally looked into taking a VCP exam, VMware had just changed the rules, so that the course requirement was mandatory.

So I spat my dummy out and didn’t bother, as my employer at the time would not send me on a course, and I couldn’t afford it myself.

Fast forward, VMware released the VCP-NV exam, where the course requirement was waived if you had a CCNA or CCNP certification. Brilliant, I jumped onto the VCP-NV and hammered all the material out there I could find, as I was also looking at moving companies to work with NSX full time.

Having passed the VCP-NV, it then allowed me to sit any other VCP exam without sitting the appropriate course.  So I finally got around to sitting the VCP5-DCV

The exam itself

Continue reading VCP5-DCV Exam Experience →